931-BL / Resource center / Drivers
Install once and every tray is ready to print. Multidriver sets up the MP Tray and Trays 1–5 as separate printers, each keeping its own paper size, media and print style.
Most stores should install Multidriver.
Installs every tray of the 931-BL as its own printer, and supports several 931-BL printers on the same workstation.
Installs the 931-BL as one printer on the workstation. Download and install it before connecting or configuring the printer.
A single driver shows your computer one printer, so every job starts from scratch. Multidriver turns each tray of the 931-BL into its own printer with its own saved settings. Set each tray up once and it stays that way.
Qrinto can only see one printer, so the paper size, media and print style have to be chosen again each time.
Next order: start over.
The MP Tray and Trays 1–5 each appear as a separate printer. Assign each one a product and it keeps that configuration.
Next order: pick the tray and print.
| Single driver | Multidriver | |
|---|---|---|
| Printers you see | One: Noritsu 931 BL | Six: MP Tray and Trays 1–5 |
| Tray settings | Shared, so each job overwrites the last | Each tray keeps its own size, paper, sides and fold |
| Before every print | Open settings and rebuild the job | Nothing to change |
| Choosing a tray | Manual, from memory | Qrinto recommends the tray that matches the order |
| Wrong-paper reprints | Common when a setting is missed | Rare, because settings don't move |
| Setup | Quick, then repeated on every job | Once, then ready for good |
The same store, the same 931-BL. The only difference is which driver is installed.
Do this once on the store PC. After that, there's nothing to set up again.
Download the package on the Windows PC that will run the 931-BL.
It adds the MP Tray and Trays 1–5 as six separate printers.
Connect the 931-BL, then install the PrintTrays driver so Qrinto can reach each tray.
In Qrinto, open Trays, turn on the trays you use, set what's loaded and select Save tray setup.
Ready for good. Your tray settings are saved, so every future order prints to the right tray without changing anything.